SUNWAY Outdoor Cabinet ESS 20kW 40kWh

Products BANNER
SUNWAY Outdoor Cabinet ESS 20kW 40kWh
SUNWAY Outdoor Cabinet ESS 20kW 40kWh
SUNWAY Outdoor Cabinet ESS 20kW 40kWh
SUNWAY Outdoor Cabinet ESS 20kW 40kWh
SUNWAY Outdoor Cabinet ESS 20kW 40kWh
SUNWAY Outdoor Cabinet ESS 20kW 40kWh
SUNWAY Outdoor Cabinet ESS 20kW 40kWh
SUNWAY Outdoor Cabinet ESS 20kW 40kWh
SUNWAY Outdoor Cabinet ESS 20kW 40kWh
SUNWAY Outdoor Cabinet ESS 20kW 40kWh
SUNWAY Outdoor Cabinet ESS 20kW 40kWh
Description :

SW-20Kw40kWh is a compact 20 kW / 40 kWh outdoor ESS cabinet that pairs air-cooled reliability with up to 30 kW of PV input — switching seamlessly between on-grid and off-grid power for C&I sites, charging hubs, and microgrids.

Description du produit :
  • The SW-20Kw40kWh is an all-in-one outdoor energy storage solution built for commercial and industrial facilities, microgrids, and PV+ESS+charging projects. At its core is a 40 kWh LFP battery bank (100 Ah cells, 1P128S, 409 V) paired with a 20 kW rated AC output and 0.5C charge/discharge capability. The system accepts up to 30 kW of PV input through two MPPT channels (200–960 V), so solar power can be stored and dispatched directly on site.

 

  • With under 20 ms on/off-grid switching, critical loads stay powered through grid disturbances, and 100% unbalanced three-phase load support keeps operation stable in real-world conditions. The cabinet is engineered for outdoor life: air-cooled thermal management, IP54 protection, aerosol fire suppression, and intelligent dehumidification reduce maintenance and extend service life. Multiple units can run in parallel as energy needs grow, while remote cloud EMS provides monitoring, upgrades, and cloud-based operations over RS485/Ethernet with Modbus — making SW-20Kw40kWh a flexible, low-maintenance foundation for distributed energy storage.

 

Fiche d'information produit

Modèle SW-20kW40kWh
Paramètres de la batterie
Charge/Discharge Rate 0,5°C
Rated Cell Capacity [Ah] 100
Rated Voltage [V] 409
Operating Voltage Range [V] 358~467
Rated Energy [kWh] 40
Configuration 1P128S
AC Parameters (On-Grid)
Rated Output Power [kW] 20
Rated Output Current [A] 29
Max Output Power [kVA] 22
Max Output Current [A] 32
Rated Grid Voltage [V] 3W/N/PE, 220/380, 230/400
Rated Grid Frequency [Hz] 50
Facteur de puissance 1(0.9 leading~0.9 lagging)
THDi ≤3% (@ Rated power)
AC Parameters (Off-Grid)
Rated Output Power [kW] 20
Rated Output Current [A] 29
Rated Output Voltage [V] 3W/N/PE, 220/380, 230/400
Rated Output Frequency [Hz] 50
Switching Time [ms] <20
PV Parameters
Max. PV Input Power [kWp] 30
Max. PV Input Voltage [V] 1000
No. of MPPTs / Max. Strings per MPPT 2/2
Operating Voltage Range [V] 200~960
Max. PV Input Current [A] 2*25
Max. PV Short-Circuit Current [A] 2*30
Paramètres généraux
IP Rating IP54
Méthode de refroidissement Refroidissement par air
Système de protection incendie Aerosol
Humidité relative 0~95%, Non-condensing
Operating Temperature Range [°C] -20~+50
Max Altitude [m] 4000 (>2000 Derating required)
Communication Method RS485, Ethernet
Communication Protocol Modbus
Weight [kg] ≈1000
Dimensions(W*D*H)[mm] 1395*1000*1800

Laissez un message

Si l'un de nos produits vous intéresse, n'hésitez pas à nous contacter. Nous vous présenterons nos produits plus en détail.

TABLEAU D'AFFICHAGE

Produits
Contacts
WhatsApp
E-mail